Sensor (Staple Finisher Paddle) Removal - Lexmark M52 Series Service Manual

Installation note: Pay attention to the original position of the string. The string on the pulley is wound
clockwise.
Sensor (staple finisher paddle) removal
1
Remove the staple finisher left cover. See
2
Remove the staple finisher right cover. See
3
Remove the staple finisher top cover. See
4
Remove the sensor retainer (A), and then disconnect the cable (B).
5
Remove the sensor.
"Staple finisher left cover removal" on page
"Staple finisher right cover removal" on page
"Staple finisher top cover removal" on page
Parts removal
618
4064
584.
586.
588.