Shpf Bin Link Assembly Removal - Lexmark M52 Series Service Manual

SHPF bin link assembly removal

1
Remove the staple, hole punch finisher left cover. See
page 699.
2
Remove the staple, hole punch finisher right cover. See
on page 701.
3
Remove the staple, hole punch finisher controller board. See
removal" on page 705.
4
Remove the staple, hole punch finisher elevator drive. See
removal" on page 722.
5
Remove the screw (A), and then remove the left tray link.
"Staple, hole punch finisher left cover removal" on
"Staple, hole punch finisher right cover removal"
"Staple, hole punch finisher controller board
"Staple, hole punch finisher elevator drive
Parts removal
733
4064