Motor Tests; Output Device Diagnostics; Sensor Tests; Config Menu - Lexmark M52 Series Service Manual

Motor tests

For non-touch-screen printer models, press
1
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests
2
Select a motor, and then press
Notes:
•
If the motor is activated, then it is properly working.
•
Some motors require automatic deactivation in order to avoid secondary issues such as possible
damage and contamination.
•
Some tests require a special action to activate a motor such as removing a major component.
•
If the motor fails, the test failure may not indicate a failed motor. Further troubleshooting may be
required. Check the boards and cables for possible issues.

Output device diagnostics

Sensor tests

For non-touch-screen printer models, press
1
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests
2
Select the output device where the sensor is located.
3
Find, and then manually toggle the sensor.
Notes:
•
The sensor status on the screen toggles between 1 and 0 when the sensor is properly working.
•
If a sensor test fails, the test failure may not indicate a failed sensor. Further troubleshooting may be
required. Check the boards and cables for possible issues.
Config Menu
Menu item
USB Configuration
USB PnP
1*
2
Note: An asterisk (*) next to a value indicates the factory default setting.
to navigate through the settings.
or touch Start.
to navigate through the settings.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Service menus
386
4064