Sensor (Oe Diverter Plunger Hp) Removal - Lexmark M5150 Service Manual

Sensor (OE diverter plunger HP) removal

1
Remove the output expander left cover. See
2
Remove the seven screws (A) from the frame.
3
Pull away the frame to access the parts underneath. Disconnect the sensor cable (B).
4
Release the latches (C) securing the sensor to the frame, and then remove the sensor.
Note: It will be less difficult releasing the latches if a prying tool is used.
"Output expander left cover removal" on page
Repair information
575
4063
560.