331 Errors; 331 Error Messages; Shpf Elevator Drive Failure Service Check - Lexmark M52 Series Service Manual

Action
Step 14
Check the affected controller board and its connector pins for
damage.
Are the bin controller board and its connectors free of damage?
Step 15
Replace the bin controller board. See
board removal" on page
Does the problem remain?

331 errors

331 error messages

Error Description
code
331.50 The bin 1 motor (SHPF elevator) did not
turn on.
331.51 The bin 1 motor (SHPF elevator) did not
turn off.
331.60 The bin 2 motor (SHPF elevator) did not
turn on.
331.61 The bin 2 motor (SHPF elevator) did not
turn off.

SHPF elevator drive failure service check

Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Clean all the optional bin doors, and then check the paper path
and bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
"Staple finisher controller
590.
Action
See
page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Contact the next
level of support.
"SHPF elevator drive failure service check" on
370.
Yes
Go to step 2.
Go to step 4.
Go to step 4.
370
4064
No
Go to step 15.
The problem is
solved.
No
The problem is
solved.
Go to step 3.
The problem is
solved.