133 Errors; 133 Error Messages; Imaging Unit Ctls Failure Service Check - Lexmark M52 Series Service Manual

Action
Step 9
Replace the LVPS. See
Does the problem remain?
Step 10
Restart the printer.
Does the problem remain?
Step 11
Replace the controller board. See
page 424.
Does the problem remain?
Step 12
Restart the printer.
Does the problem remain?

133 errors

133 error messages

Error code Description
133.04 CTLS timeout was detected at the imaging unit.
133.05 CTLS reading at the imaging unit is above the
maximum expected value.
133.06 CTLS reading at the imaging unit is below the
minimum expected value.
133.08 Excessive CTLS noise was detected at the
imaging unit.

Imaging unit CTLS failure service check

Action
Step 1
Check the imaging unit for proper installation.
Is the imaging unit properly installed?
Step 2
Reinstall the imaging unit.
Does the problem remain?
"LVPS removal" on page
"Controller board removal" on
Diagnostics and troubleshooting
Yes
Go to step 10.
414.
Go to step 11.
Go to step 12.
Contact the next
level of support.
Action
See "Imaging unit CTLS failure service check"
on page 310.
Yes
Go to step 3.
Go to step 3.
310
4064
No
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.