Lexmark M52 Series Service Manual page 172

Error code Description
244.70 Motor (2100‑sheet tray 4 elevator) does not turn
on.
244.71 Motor (2100‑sheet tray 4 elevator) does not turn
off.
244.72 Motor (2100‑sheet tray 4 elevator) speed did not
ramp up to the required level.
244.73 Motor (2100‑sheet tray 4 elevator) stalled.
244.74 Motor (2100‑sheet tray 4 elevator) ran too slow.
244.75 Motor (2100‑sheet tray 4 elevator) ran too fast.
244.76 Motor (2100‑sheet tray 4 elevator) ran too long.
244.80 Motor (tray 4 pick/lift) does not turn on.
244.81 Motor (tray 4 pick/lift) does not turn off.
244.82 Motor (tray 4 pick/lift) speed did not ramp up to
the required level.
244.83 Motor (tray 4 pick/lift) stalled.
244.84 Motor (tray 4 pick/lift) ran too slow.
244.85 Motor (tray 4 pick/lift) ran too fast.
244.86 Motor (tray 4 pick/lift) moved too long.
244.91 Paper remains detected at the sensor (tray 4
pass‑through) after the printer is turned on.
244.93 Paper never arrived at the sensor (tray 4
pass‑through). Paper source is undetermined.
244.95 Paper cleared the sensor (tray 4 pass‑through)
later than expected. Paper source is
undetermined.
244.96 Paper was picked but it never reached the
sensor (tray 4 pass‑through). Paper source is
undetermined.
244.97 Paper never cleared the sensor (tray 4
pass‑through). Paper source is undetermined.
Action
See
check" on page
See
check" on page
See
service check" on page
See
or late-leaving jam service check" on page
177.
See
page
See
or late-leaving jam service check" on page
177.
Diagnostics and troubleshooting
172
"2100‑sheet tray elevator drive jam service
152.
"Optional tray pick drive failure service
324.
"Sensor (tray 4 pass‑through) static jam
173.
"Sensor (tray 4 pass‑through) late‑arriving
"Tray 5 pick jam service check" on
183.
"Sensor (tray 4 pass‑through) late‑arriving
4064