410-412 Paper Jams; 410-412 Paper Jam Messages - Lexmark M52 Series Service Manual

Action
Step 20
Check the affected controller board and its connector pins for
damage.
Are the bin controller board and its connectors free of damage?
Step 21
Replace the bin controller board. See
controller board removal" on page
Does the problem remain?
410–412 paper jams
410–412 paper jam messages
Error Description
code
410.13 The bin 1 diverter did not reach the sensor
(HCOE diverter) on time.
410.15 The bin 1 diverter did not clear the sensor
(HCOE diverter) on time.
411.50 Motor (HCOE transport) does not turn on. See
411.51 Motor (HCOE transport) does not turn off.
411.52 Motor (HCOE transport) did not ramp up
to the required level.
411.53 Motor (HCOE transport) stalled.
411.54 Motor (HCOE transport) ran too slow.
411.55 Motor (HCOE transport) ran too fast.
412.11 Paper remains detected at the sensor
(HCOE pass‑through) after the printer is
turned on.
412.13 Paper going to bin 1 did not reach the
sensor (HCOE pass‑through) on time.
412.15 Paper going to bin 1 did not clear the
sensor (HCOE pass‑through) on time.
"Output expander
524.
Action
See "HCOE diverter drive jam service check" on page
195.
"HCOE transport drive jam service check" on
page 197.
See "Sensor (HCOE pass‑through) static jam service
check" on page
See "Sensor (HCOE pass‑through) late‑arriving or
late‑leaving jam service check" on page
Diagnostics and troubleshooting
194
Yes No
Contact the next Go to step 21.
level of support.
Contact the next The problem is
level of support. solved.
199.
4064
200.