Shpf Timeout Error Service Check - Lexmark M52 Series Service Manual

SHPF timeout error service check

Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Clean all the optional bin doors, and then check the paper path
and bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 4
Clear the optional bin paper path rollers of any dirt and
contamination.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output bin quick feed > Feed to all bins
b
Touch Single or Continuous.
Does the problem remain?
Step 6
a
Remove the SHPF left cover. See
left cover removal" on page
b
Reseat the staple, hole punch finisher interface cable on the
SHPF controller board.
Does the problem remain?
Step 7
a
Remove the staple, hole punch finisher. See
hole punch finisher removal" on page
b
Check the connector and pins of the staple, hole punch finisher
interface cable for damage.
c
Check the staple, hole punch finisher interface cable for
improper installation.
Is the interface cable properly installed and free of damage?
"Staple, hole punch finisher
699.
"Optional staple,
698.
Diagnostics and troubleshooting
280
Yes No
Go to step 2. The problem is
solved.
Go to step 4. Go to step 3.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
4064