Sensor (Mailbox Pass-Through 1) Static Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 9
Check the mailbox transport drive gear for damage.
Is the drive gear free of damage?
Step 10
Replace the gear. See
page 663.
Does the problem remain?
Step 11
Make sure that the controller board of the affected optional bin is
properly installed. Reseat all the cables on the controller board.
Does the problem remain?
Step 12
Check the affected controller board and its connector pins for
damage.
Are the bin controller board and its connectors free of damage?
Step 13
Replace the bin controller board. See
removal" on page 667.
Does the problem remain?
Sensor (mailbox pass‑through 1) static jam service check
Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Open all optional bin doors, and then check the paper path and
bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
"Mailbox transport drive gear removal" on
"Mailbox controller board
Diagnostics and troubleshooting
Yes
Go to step 11.
Go to step 11.
Go to step 12.
Contact the next
level of support.
Contact the next
level of support.
Yes
Go to step 2.
Go to step 4.
Go to step 4.
209
4064
No
Go to step 10.
The problem is
solved.
The problem is
solved.
Go to step 13.
The problem is
solved.
No
The problem is
solved.
Go to step 3.
The problem is
solved.