Sensor (250- And 550-Sheet Tray Pass-Through) Removal; Sensor (250- And 550-Sheet Tray Pick) Removal - Lexmark M52 Series Service Manual

4
Remove the two screws (B), and then remove the controller board.
Sensor (250‑ and 550-sheet tray pass‑through) removal
1
Remove the tray insert.
2
Remove the screw (A), and then disconnect the sensor cable (B).
3
Remove the sensor.
Sensor (250‑ and 550-sheet tray pick) removal
1
Remove the tray insert.
2
Remove the pick roller. See "Pick roller removal" on page
Parts removal
507
503.
4064