Assembly And Disassembly Guidelines; Removing The Power Meter Cover - Agilent Technologies E4416A Service Manual

Assembly and Disassembly Guidelines

The guidelines in this section describe the removal and replacement of the
major assemblies in the Agilent E4416A and Agilent E4417A power meters.
Once an assembly has been replaced, refer to
page 61 to ensure that the correct performance tests and adjustments are
carried out.
Refer to the safety symbols on the power meter and "Equipment Operation" at
WARN IN G
the beginning of the document before operating this power meter with the cover
removed. Failure to comply with the safety precautions can result in severe or
fatal injury.
Before carrying out any assembly or disassembly of the power meter ensure that
WARN IN G
you disconnect the power cord. Even with the power meter switched off there
are potentially dangerous voltages present on the power supply assembly.

Removing the Power Meter Cover

When replacing the power meter cover retighten the captive screws in the rear
bezel using a 9 lb/in T15 screw driver.
E4416A/E4417A Power Meters Service Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Replaceable Parts
"Post- Repair Adjustments"
5
on
95