Table of Contents
Advertisement
Operating Guide | VACON® NXS/NXP Air-cooled
3 Product Overview
3.1 Intended Use
The drive is an electronic motor controller intended for:
•
Regulation of motor speed in response to system feedback or to remote commands from external controllers. A power drive
system consists of the AC drive, the motor, and equipment driven by the motor.
•
System and motor status surveillance.
The drive can also be used for motor overload protection.
®
VACON
NXP drive can be used as programmable logic controller (PLC) in many applications due to extensive I/O and fieldbus options
and easy programmability. Custom application development can be done with VACON
programming languages defined in the IEC 61131/3.
Depending on the configuration, the drive can be used in standalone applications or form part of a larger appliance or installation.
The drive is allowed for use in residential, industrial, and commercial environments in accordance with local laws and standards.
In a residential environment, this product can cause radio interference, in which case supplementary mitigation measures can
be required.
Foreseeable misuse
Do not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensure
compliance with the conditions specified in
3.2 Manual Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Manual and Software Version
Edition
Remarks
DPD00910I
Added information about FR10 and FR11 Standalone drives throughout the manual.
Minor corrections throughout the manual.
3.3 Package Label
The package label gives detailed information about the delivery.
16 | Danfoss A/S © 2020.02
N O T I C E
12.8 VACON® NXP Technical
®
Programming tool and standard PLC
Data.
AQ275638903263en-000301 / DPD00910
Product Overview
Advertisement
Table of Contents
