Danfoss VACON NXS Series Operating Manual page 202

Operating Guide | VACON® NXS/NXP Air-cooled
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.13 Fault 8 - System fault, Subcode S5 - Disturbance in VaconBus
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.14 Fault 8 - System fault, Subcode S6 - Feedback of charging switch
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.15 Fault 8 - System fault, Subcode S7 - Charging switch
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.16 Fault 8 - System fault, Subcode S8 - No power to driver card
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
202 | Danfoss A/S © 2020.02
Specifications
AQ275638903263en-000301 / DPD00910