Operating Guide | VACON® NXS/NXP Air-cooled
1
2
1 Standard
Illustration 35:
7. Attach the cable entry plate, and then the cable cover. For the tightening torques of the screws, see
Cover
Screws. Make sure that the control cables or the cables of the AC drive are not caught between the frame and the cable
cover.
6.5.6 Installing the Cables, FR10 Standalone
Context:
Follow these instructions to install the cables.
For information on how to comply with the UL regulations in cable installations, see
If it is necessary to connect an external brake resistor, see VACON
Resistor
Connection.
Prerequisites:
Make sure that the delivery contains all necessary components.
Danfoss A/S © 2020.02
FR9
2 PROFIBUS
6.1.2 UL Standards on
®
Brake Resistor Manual. See also
Electrical Installation
12.5 Tightening Torques for
Cabling.
8.7.8.2 Setting the Internal Brake
AQ275638903263en-000301 / DPD00910| 83