Table of Contents
Advertisement
Electrical Installation
Operating Guide | VACON® NXS/NXP Air-cooled
1
2
1 Standard
2 PROFIBUS
Illustration 29:
FR7/FI7
10. Attach the cover of the drive. For the tightening torques of the screws, see
12.5 Tightening Torques for Cover
Screws. Make sure
that the control cables or the cables of the AC drive are not caught between the frame and the cable cover.
6.5.4 Installing the Cables, FR8/FI8
Context:
Follow these instructions to install the cables and cable accessories.
For information on how to comply with the UL regulations in cable installations, see
6.1.2 UL Standards on
Cabling.
®
If it is necessary to connect an external brake resistor, see VACON
Brake Resistor Manual. See also
8.7.8.2 Setting the Internal Brake
Resistor
Connection.
Danfoss A/S © 2020.02
AQ275638903263en-000301 / DPD00910| 75
Advertisement
Table of Contents
