Available Emc Classes - Danfoss VACON NXS Series Operating Manual

Operating Guide | VACON® NXS/NXP Air-cooled
Mains voltage
525–690 V
525–690 V

3.7 Available EMC Classes

The product standard (EMC immunity requirements) IEC/EN 61800-3 + A1 has 5 categories. The VACON
EMC classes that have equivalents in the standard. All VACON
The type code tells which category requirement the AC drive complies with (see
The category changes when these properties in the AC drive change:
• the level of electromagnetic disturbances
• the requirements of a power system network
• the installation environment (see the standard IEC/EN 61800-3 + A1)
Table 5: Available EMC Classes
EMC class
®
VACON
in IEC/EN
equiva‐
61800-3 +
lent
A1
EMC
class
C1 C
C2 H
C3 L
Danfoss A/S © 2020.02
Enclosure size
FR10 Standalone
FR11 Standalone
Description
The best EMC protection. These AC drives have the nominal voltage of less than
1000 V. They are used in the 1st environment.
If the protection rating of the AC drive is IP21 (UL Type 1), only the conducted
emissions are in the requirements of category C1.
Includes AC drives in fixed installations. These AC drives have the nominal voltage of
less than 1000 V. The category C2 AC drives can be used in the 1st and the 2nd envi-
ronment.
Includes AC drives that have the nominal voltage of less than 1000 V. These AC
drives are used in the 2nd environment only.
IP21 (UL Type 1)
x
x
®
NX AC drives comply with the standard IEC/EN 61800-3 + A1.
3.4 Description of the Type
N O T I C E
Product Overview
IP54 (UL Type 12)
x
–
®
AC drives are divided into 5
Code).
Available for
380–500 V, FR4
to FR6, IP54 (UL
Type 12)
380–500 V, FR4
to FR9 and 208–
240 V, FR4 to
FR9
IP21 (UL Type 1)
and IP54 (UL
Type 12) in
380–500 V FR10
and larger, 525–
690 V FR6 and
larger
AQ275638903263en-000301 / DPD00910| 23