Danfoss VACON NXS Series Operating Manual page 94

Electrical Installation
Operating Guide | VACON® NXS/NXP Air-cooled
6.6.1 Installing the AC drive in an IT System, FR4–FR6
Context:
Use these instructions to change the EMC protection of the AC drive to level C4.
Prerequisites:
Open the cover of the AC drive and remove the cable cover as instructed in 6.4.1 Get Access and Locate the Terminals for FR4/FI4, 6.4.2
Get Access and Locate the Terminals for FR5 or 6.4.3 Get Access and Locate the Terminals for FR6/FI6.
94 | Danfoss A/S © 2020.02
AQ275638903263en-000301 / DPD00910