Installing The Cables, Fr11 Standalone - Danfoss VACON NXS Series Operating Manual

Electrical Installation
Operating Guide | VACON® NXS/NXP Air-cooled
5 Control cables
5. Attach the cable clamp.
6. Attach the safety covers. For the tightening torques of the screws, see
12.5 Tightening Torques for Cover Screws. Make sure that
the control cables or the cables of the AC drive are not caught between the frame and the safety covers.
7. Close the cabinet doors.

6.5.7 Installing the Cables, FR11 Standalone

Context:
Follow these instructions to install the cables.
For information on how to comply with the UL regulations in cable installations, see 6.1.2 UL Standards on Cabling.
®
If it is necessary to connect an external brake resistor, see VACON Brake Resistor Manual. See also 8.7.8.2 Setting the Internal Brake
Resistor Connection.
Prerequisites:
Make sure that the delivery contains all necessary components.
Open the covers according to instructions in 6.4.8 Get Access and Locate the Terminals for FR11 Standalone.
88 | Danfoss A/S © 2020.02
AQ275638903263en-000301 / DPD00910