Danfoss VACON NXS Series Operating Manual page 7

Operating Guide | VACON® NXS/NXP Air-cooled
8.7.9.10 Debug Menu (S6.8.7)
8.8 Using the Expander Board Menu
8.8.1 Expander Board Menu
8.8.2 Examining the Connected Option Boards
8.8.3 Finding the Option Board Parameters
8.9 Further Control Panel Functions
9 Commissioning
9.1 Safety Checks before Starting the Commissioning
9.2 Commissioning the AC Drive
9.3 Measuring the Cable and Motor Insulation
9.3.1 Insulation Checks of the Motor Cable
9.3.2 Insulation Checks of the Mains Cable
9.3.3 Insulation Checks of the Motor
9.4 Checks after Commissioning
9.4.1 Testing the AC Drive after Commissioning
9.4.2 RUN Test without Load
9.4.2.1
9.4.2.2
9.4.3 Start-up Test
9.4.4 Identification Run
10 Maintenance
10.1 Maintenance Schedule
10.2 Reforming the Capacitors
11 Fault Tracing
11.1 General Information on Fault Tracing
11.2 Resetting a Fault
11.3 Creating Service Info File
12 Specifications
12.1 Weights of the AC Drive
12.2 Dimensions
12.2.1 List of Dimension Information
12.2.2 Wall-mounted
12.2.2.1 Dimensions for FR4-FR6
12.2.2.2 Dimensions for FR7
12.2.2.3 Dimensions for FR8
12.2.2.4 Dimensions for FR9
12.2.3 Flange mounting
12.2.3.1 Dimensions for Flange Mounting, FR4-FR6
12.2.3.2 Dimensions for Flange Mounting, FR7-FR8
Danfoss A/S © 2020.02
Test A: Controls from the Control Terminals
Test B: Control from the Keypad
Contents
140
140
140
140
141
141
142
142
143
144
144
145
145
146
146
146
146
147
147
147
148
148
148
150
150
150
151
152
152
152
152
153
153
155
157
159
161
161
163
AQ275638903263en-000301 / | 7