Operating Guide | VACON® NXS/NXP Air-cooled
Procedure
1. Make sure that the mounting surface is sufficiently flat.
2. Check the dimensions of the AC drive, see
3. Make sure that there is sufficiently free space around the AC drive for cooling, see
FR11). Some free space is also necessary for maintenance.
4. The enclosures have fixing holes. If needed, fix the AC Drive to the wall.
1
1 Fixing hole, Ø= 13 mm (0.51 in)
40 | Danfoss A/S © 2020.02
12.2.4.1 Dimensions for FR10–FR11
Standalone.
5.2.3 Cooling of Standalone AC drives (FR10 to
AQ275638903263en-000301 / DPD00910
Mounting the Unit