Power Ratings; Overload Capability - Danfoss VACON NXS Series Operating Manual

Operating Guide | VACON® NXS/NXP Air-cooled
Enclosure size
FR10 Standalone
FR11 Standalone

12.7 Power ratings

12.7.1 Overload Capability

The low overload means that if 110% of the continuous current (I
must be approximately 98% of I
I
I L*110%
I L
1 min
Illustration 80: Low Overload
The high overload means that if 150% of the continuous current (I
minutes must be approximately 92% of I
Danfoss A/S © 2020.02
Drive type Tightening torque (Nm)
0385 5–0520 5 40
0261 6–0416 6
0590 5–0730 5 40
0460 6–0590 6
or less. This is to make sure that the output current is not more than I
L
9 min
or less. This is to make sure that the output current is not more than I
H
) is required for 1 minute every 10 minutes, the remaining 9 minutes
L
I L*110%
t
) is required for 1 minute every 10 minutes, the remaining 9
H
Specifications
Tightening torque (lb-in.)
354
354
during the duty cycle.
L
during the duty cycle.
H
AQ275638903263en-000301 / DPD00910| 181