Table of Contents
Advertisement
Operating Guide | VACON® NXS/NXP Air-cooled
E1Ø
67.5
115 (4.53)
(2.7)
Illustration 77:
Dimensions of the Mounting Holes for VACON
Table 38: Dimensions of the Mounting Holes in mm (inch) for VACON
Drive type
E1Ø, grommet in‐
side diameter
•
0385 5–
4 x 21
0520 5
(4 x 0.83)
•
0261 6–
0416 6
1
Same as maximum cable thickness. NOTE! Cable clamps have 40 mm internal diameter. The clamps are used for 360 degree grounding of the shield. Exposing the cable shield
decreases outer diameter of the cable so the recommended 3x185+95 mm
Danfoss A/S © 2020.02
545 (21.5)
E2Ø
E1Ø, gland
(1)
plate hole
4 x 28
(4 x 1.10)
2
MCCMK motor cables fit in the clamp.
E3Ø
®
NXS/NXP AC Drive, FR10 Standalone
®
NXS/NXP AC Drive, FR10 Standalone
E2Ø, grommet in‐
(1)
side diameter
4 x 48
(4 x 1.89)
Specifications
E2Ø, gland
E3Ø, mounting
plate hole
holes for fixing to
floor
4 x 60
9 x 11
(4 x 2.36)
(9 x 0.43)
AQ275638903263en-000301 / DPD00910| 169
Advertisement
Table of Contents
