Installing The Cables, Fr9 - Danfoss VACON NXS Series Operating Manual

Operating Guide | VACON® NXS/NXP Air-cooled
7. Attach the grounding clamps for control cable on the grounding level with M4x16 screws. Use the clamps delivered in the
accessories bag. Use the clamps to ground the control cables. Connect the control cables.
1
2
1 Standard
Illustration 32:
8. Attach the cover of the drive. For the tightening torques of the screws, see

6.5.5 Installing the Cables, FR9

Context:
Follow these instructions to install the cables.
For information on how to comply with the UL regulations in cable installations, see
If it is necessary to connect an external brake resistor, see VACON
Resistor Connection.
Prerequisites:
Make sure that the delivery contains all necessary components.
Danfoss A/S © 2020.02
FR8/FI8
2 PROFIBUS
12.5 Tightening Torques for Cover
6.1.2 UL Standards on
®
Brake Resistor Manual. See also
Electrical Installation
Screws.
Cabling.
8.7.8.2 Setting the Internal Brake
AQ275638903263en-000301 / DPD00910| 79