4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT
4.3.2 Wiring the external device connection connector pins
The pins for the external device connection connector are wired in the following
manner.
(1)
(2)
(3)
(1) Disassembling the connector section
Connector
section
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Disassembling the connector section
Connecting the connector and wire
Assembling the connector section
(a) Loosen and remove screw A.
(Take care not to lose the screw and nut.)
(b) Open the connector cover from the connector side.
(c) Remove the connector and cable fixture.
Cable fixture
Connector cover
4 - 13
..... Disassemble the connector section,
and remove the connector.
..... Solder the wire onto the connector pin.
..... Assemble the connector section.
A
Connector
MELSEC-A