Generic Terms And Abbreviations - Mitsubishi A1SD75P1-S3 User Manual

Generic Terms and Abbreviations

Unless specially noted, the following generic terms and abbreviations are used in this
manual.
Generic term/abbreviation
PLC CPU Generic term for PLC CPU on which AD75 can be mounted.
AD75 Generic term for positioning module AD75P1-S3, AD75P2-S3, AD75P3-S3, A1SD75P1-S3,
A1SD75P2-S3, and A1SD75P3-S3.
The module type is described to indicate a specific module.
Peripheral device Generic term for DOS/V personal computer that can run the following "AD75 Software
Package".
Generic term for "SW1IVD-AD75P type positioning module software package" and "GX
AD75 software package
Configurator-AP Version 1 (SW0D5C-AD75P-E)."
Drive unit Abbreviation for pulse input compatible drive unit (servo amplifier, stepping motor).
Manual pulse generator Abbreviation for manual pulse generator (prepared by user).
Data link system Abbreviation for MELSECNET (II) and MELSECNET/B data link system.
Network system Abbreviation for MELSECNET/10 network system.
I/F Abbreviation for interface.
17-segment LED 17-segment display mounted on upper front of AD75.
DOS/V personal computer IBM PC/AT
Personal computer Generic term for DOS/V personal computer.
Workpiece Generic term for moving body such as workpiece and tool, and for various control targets.
Axis 1, axis 2, axis 3 Indicates each axis connected to AD75.
1-axis, 2-axis, 3-axis Indicates the number of axes. (Example: 2-axis = Indicates two axes such as axis 1 and axis 2,
axis 2 and axis 3, and axis 3 and axis 1.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Details of generic term/abbreviation
and compatible DOS/V compliant personal computer.
R
A - 18