List Of Configuration Devices - Mitsubishi A1SD75P1-S3 User Manual

2 SYSTEM CONFIGURATION

2.2 List of configuration devices

The positioning system using the AD75 is configured of the following devices.
No. Part name
1 Positioning module
AD75 software
2
package
3 Personal computer
4 Teaching unit
5 Conversion cable
Connection cable
6
(converter)
7 Drive unit
Manual pulse
8
generator
Connection cable
9
(dedicated)
Connection cable
10
(prepared by user)
Module name
Pulse resolution
Output method
Power supply voltage
Current consumption
Life time
Permitted axial loads
Operation temperature
Weight
Number of max. revolution
Pulse signal status
Friction torque
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Type
AD75P1-S3
75P
AD75P2-S3
AD75P3-S3
A1SD75P1-S3
A1SD75P2-S3
A1SD75P3-S3
SW1IVD-AD75P-E DOS/V personal computer software package
SW0D5C-AD75P-E For details, refer to the GX Configurator-AP Operating Manual.
(Prepared by user)
DOS/V personal
computer
Refer to the AD75 Software Package Operating Manual for details.
Unit for setting, monitoring and testing the AD75 parameters and
AD75TU
positioning data.
A1SD75-C01H
Length 30cm Cable for connecting RS-422 cable and A1SD75P -S3.
A1SD75-C01HA
RS-232 cable for connecting AD75 with DOS/V personal computer, and
– RS-232/RS-422 converter. (Prepared by user)
Refer to the AD75 Software Package Operating Manual for details.
– (Prepared by user)
(Prepared by user)
–
Recommended: MR-HDP01 (Mitsubishi Electric)
AD75C20SH For MR-H
AD75C20SJ2 For MR-J2/J2S-A
AD75C20SC For MR-C
Cable for connecting AD75 with drive unit, manual pulse generator or
– machine system input signal. (Prepared by user)
Refer to manual of connected device.
Specifications list of recommended manual pulse generator
Item
Remarks
-S3
No. of control axes
· AD ....... Building block type
· A1SD ... Compact building block type
Cable for connecting AD75 with drive unit, manual
pulse generator or machine system input signal.
Specifications
25 pulse/rev (100 pulse/rev after magnification by 4)
Voltage-output (power supply voltage -1V or more),
Output current = Max. 20mA
4.5 to 13.2VDC
100 revolutions (at 200r/min)
Radial load : Max. 19.6N
Thrust load : Max. 9.8N
-10 to 60 ° C (14 to 140 ° F)
0.4 (0.88) [kg(Ib)]
Instantaneous Max. 600r/min. normal 200r/min
2 signals : A phase, B phase, 90 ° phase difference
0.1N/m (at 20 ° C (68 ° F))
2 - 4
MELSEC-A
MR-HDP01
60mA