Mitsubishi A1SD75P1-S3 User Manual page 342

9 MAIN POSITIONING CONTROL
(1) 2-axis circular interpolation control with center point designation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(ABS right arc, ABS left arc)
Operation chart
In the absolute system, 2-axis circular interpolation control with center point
designation, addresses established by a machine zero point return on a 2-axis
coordinate plane are used. Positioning is carried out from the current stop position
(start point address) to the address (end point address) set in " Da.5 Positioning
address/movement amount", in an arc path having as its center the address (arc
address) of the center point set in " Da.6 Arc address".
Forward direction
Reverse direction
Reverse direction
Positioning of a complete round with a radius from the start point address to the
arc center point can be carried out by setting the end point address (positioning
address) to the same address as the start point address.
Forward direction
Reverse direction
Reverse direction
Movement by circular interpolation
Start point address
(current stop position)
Radius
Arc address
Arc center point
(Arc address)
9 - 41
MELSEC-A
End point address
(positioning address)
Forward direction
Start point address
End point address
=
(current stop position) (positioning address)
Forward direction