Mitsubishi A1SD75P1-S3 User Manual page 507

13 COMMON FUNCTIONS
(2) Display details
Operation monitor 1
Operation monitor 2
Internal information 1
Internal information 2
Input/output
information n
Stepping motor mode
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The details displayed in the LED display area are classified into several types of
information (called "modes"). The following types of information are displayed
according to the various modes on the "17-segment LED display" and "axis
display LED".
(The display is changed over by the "mode switch". Refer to section "(3)
Changing the display details" for more information.)
(a) List of display details
Mode 17-segment LED display
One of the following is displayed.
RUN (during operation)
TEST (during a test mode)
IDL (standing by)
The following is displayed.
Display: ERR
The operation status is displayed for
the axis whose axis display LED is lit.
The OS type information is displayed.
Display: S003
The OS version is displayed.
Display: V
The signal name designated by the
mode switch is displayed.
STMM display
REMARK
The "OS type" appears in the LED display area for 1 second after the PLC power is
turned ON, then the "operation monitor 1" display appears.
When there is no error
When an error occurs
13 - 8
MELSEC-A
Axis display LED
The display of the axis in
operation is in operation blinks.
The displays of all axes are in
operation blinks.
OFF
The LED of the axis in which
the error occurred is flickering.
The AXn display changes over
every 0.5 seconds.
OFF
OFF
Lights when the selected signal is
ON.
The stepping motor mode axis
display is lit.