Mitsubishi A1SD75P1-S3 User Manual page 482

12 CONTROL AUXILIARY FUNCTIONS
Example
*
* No.19 Teaching program
*
*
*
• Positioning to the target position with manual operation.
*
• Store the data other than the positioning data interface address
*
*
*
*
POINT
(1) Use the address 1103 to 1137 areas in the system control data area as the buffer memory
for the positioning data interface.
(2) Confirm the teaching function and teaching procedure before setting the positioning data.
(3) The positioning addresses that are written are absolute address (ABS) values.
(4) If the positioning operation is correctly completed with the written positioning data, it is
recommended that the positioning data be registered in the AD75 flash ROM.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2) Carry out the teaching operation with the following program.
in D40 to D45.
12 - 69
MELSEC-A
<Teaching command pulse>
<Teaching command hold>
<Positioning data write>
<Axis 1 setting>
<Positioning data No.1 setting>
<Teaching data setting>
<Write request setting>
<Teaching data write>
<Teaching result read>
<Teaching command storage OFF>