Table of Contents
Advertisement
USING THE DIGITAL OPERATOR
3.1.5 Operation in Parameter Setting Mode cont.
The bits of the memory switches can be turned ON and OFF to select the functions required.
The following example shows how to turn ON bit 4 of memory switch Cn-02.
3
TERMS
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Changing the Memory Switch Settings (Cn-01, Cn-02)
1) Press
DSPL
to select the parameter set-
SET
ting mode.
2) Select the parameter number to set.
Press the
and
digit.
Press the
and
value.
DATA
3) Press
to display the current data for
ENTER
the memory switch selected at step 2.
4) Press the
and
bit number to set.
5) Press the
and
memory switch data ON or OFF for the bit
number.
6) Repeat steps 4 and 5 as often as required.
DATA
7) Press
to store the data.
ENTER
DATA
8) Press
once more to display the pa-
ENTER
rameter number again.
Turning bits ON and OFF
Memory switches use bits, not numbers, to select
functions.
Sixteen bits are available (0 to 9 and A to F). Select
the required functions by turning the appropriate bit
ON (function ON) or OFF (function OFF).
— 3-8 —
keys to select the
keys to change the
Parameter
Number
Bit Number to Set
keys to select the
Bit
Number
keys to set the
Parameter
Number
Setting
Mode
The selected
digit flashes.
Bit Number
Memory
to Set
Switch Data
Press either key.
or
The stored data
flashes.
Memory Switch
Data
: = OFF
= ON
Advertisement
Table of Contents
