YASKAWA Sigma Mini SGMM Series User Manual page 246

Cable Connections
6.2.6 Control I/O
Use cables with CN1 connectors for control I/O. When using connector kits, use shielded
cable for the CN1 cable and make sure to ground between the cable shield and connector
case. Connect the shield at the host controller properly.
6.2.7 Digital Operator and Monitoring by Personal Computer
Use the Digital Operator or personal computer (for monitoring) for trial operation only. Discon-
nect them during normal operation.
6.2.8 Cable Core
Model
Manufacturer
The cable line and line position where the core is attached is as follows:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6.2Measures to Satisfy the EMC Directive
To be prepared by the user
To be prepared by the user
Shell + plug: 54331-0201
Socket Connector: 54280-0800
(Molex Japan)
(Molex Japan)
Blue
White/blue
Yellow
White/yellow
Green
White/green
Red
Black
Connec- Connec-
tor case tor case
Shield
ESD-SR-25
Tokin Corp.
— 6-7 —
6