Table of Contents
Advertisement
Confi guring the 5830
Figure A-1.
General tab
Confi gurator software.
Figure A-2.
PC Serial
Communications
setup screen.
A-2 | 5830 Moisture Analyzer
This section provides instructions for setting up your operating parameters
using the Configurator software.
General Tab
Use the General tab to view the current configuration and define pa-
rameters for the analyzer and for PC communications (Figure A-1).
After initial setup, any changes to the analyzer communications pa-
rameters must be made using the Device Communications tab. These
changes must be made before you make any changes to the computer
NOTE
serial port settings.
PC Communications
Click the Setup button to configure PC Communications. The Serial Port
Communication screen opens (Figure A-2).
Advertisement
Table of Contents
