Port
Select the COM port on your computer where the connection
to the analyzer is installed.
Baud Rate
Select the baud rate at which data will be transferred.
RS-232 Port
Click if the analyzer is connected to an RS-232 port.
RS-485 Port
Click if the analyzer is connected to an RS-485 port.
Address
Type the network address to which the analyzer is con-
nected.
Saving Your Settings
To save PC Communications settings, click OK.
To abort changes you have made, click Cancel.
Device
Refer to Figure A-1.
Name
Type in a name for the analyzer.
Description
Type in a description for the analyzer.
Save Configuration button
Save the analyzer's internal parameters to a file. The Save As
dialog box opens so that you can name and save the file.
Restore Configuration button
Restore the analyzer's internal parameters from a file. The
Open dialog box appears so that you can select and open the
file.
The Restore Configuration button can also be used to restore PC ana-
lyzer parameters.
NOTE
Live Data
Checked
The system connects to and uses live data from the ana-
lyzer.
Not checked
The system uses demonstration data.
PC Interface | A-3