Sample Gas; Safety Notes; Electrical Safety; Grounding - Ametek 5800 User Manual

Safety Notes

WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions
as follows:
!
WARNING
!
CAUTION

NOTE

Electrical Safety

Hazardous voltages are present in the analyzer housings when power is applied to the system.
Always shut down power source(s) before performing maintenance or troubleshooting. Only a
qualified electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair the safety
protection originally provided by the equipment.

Grounding

Instrument grounding is mandatory. Performance specifications and safety protection are void
if instrument is operated from an improperly grounded power source.

NOTE

Sample Gas

!
WARNING
vi | 5830 Moisture Analyzer
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in damage
to the equipment.
Important information that should not be overlooked.
Verify ground continuity of all equipment before applying power.
Potential hazards of the sample gas should be taken into consideration before
connecting the sample to the analyzer. Personal protective equipment and
proper ventilation should be used if sample gas is toxic, flammable, or corro-
sive. Check the sample line and all connections for leaks before powering up.
Consult plant safety personnel for appropriate exhaust venting guidelines for
specific sample gas type.