Table of Contents
Advertisement
Figure A-6.
Dryer and Moisture
Generator code entry
screens.
A-8 | 5830 Moisture Analyzer
Set Dryer Production Code
Click to enter the Dryer Production Code for the dryer that is installed in
the analyzer. Click OK to accept.
You must enter a new dryer code each time you replace the dryer.
NOTE
Set Moisture Generator Production Code
Click to enter the Moisture Generator Production Code. Click OK to ac-
cept.
Verifi cation Duration
Enter the verification duration in minutes. The system defaults to the mini-
mum time required.
Zero Duration
Enter the zero duration in minutes. The system defaults to the minimum
time required.
Scheduled Verifi cation
Schedule routine verifications by clicking the Daily, Weekly, or Monthly
button
Never
No verification will be done. Scheduling slots at the bottom
of the box are not available.
Daily
Select the time of day by entering a number in the Hour slot
at the bottom of the box.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
NOTE
Advertisement
Table of Contents
