Verify Schedule - Ametek 5800 User Manual

Verify Schedule

Use this function to schedule automatic analyzer verification.
Config
Verify Schedule
Schedule
Type
Day of
Week
Day of
Month
Hour
Duration

NOTE
Schedule Type
Select one choice from the list:
• Never
• Daily
• Weekly
• Monthly
Never
Daily
Weekly
Day of the Week
Monthly
Select the day of the week from the list.
Sunday
Monday
Tuesday
Day of the Month
Wednesday
Enter the 2-digit value for the day of the month.
Thursday
Friday
Saturday
Hour
Enter Value
Enter the 2-digit value for the hour of the day using
Enter Value
a 24-hour clock. Zero is the starting hour.
Duration
Enter Value
Enter the verify period value in minutes.
AMETEK recommends performing a verification cycle every week for
the first month of operation. After this start-up period, the analyzer
will have dried down sufficiently to increase the verification interval
to 1 month. AMETEK recommends that the duration of the verifica-
tion cycle be set to 60 (i.e. - 60 minutes).
|
User Interface 4-11