Table of Contents
Advertisement
Weekly
Select the day of the week from the drop-down list under Day
of the week at the bottom of the box. You must also enter a
time of day (1 through 24) in the Hour slot to begin the zero
cycle.
Monthly
Enter the numeric (1 through 28) day of the month in the Day
slot, and the time (1 through 24) in the Hour slot to begin zero
cycle.
Scheduled Zero
Schedule routine Zeros by clicking the Daily, Weekly, or Monthly button
Never
No zero cycle will be done. Scheduling slots at the bottom of
the box are not available.
Daily
Select the time of day by entering a number in the Hour slot
at the bottom of the box.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
NOTE
Weekly
Select the day of the week from the drop-down list under Day
of the week at the bottom of the box. You must also enter a
time of day (1 through 24) in the Hour slot to begin the zero
cycle.
Monthly
Enter the numeric (1 through 28) day of the month in the Day
slot, and the time (1 through 24) in the Hour slot to begin zero
cycle.
Saving Your Settings
To save settings on the Schedule tab, click Apply.
To save settings and exit the program, click Apply+Exit.
To abort changes you have made, click Cancel+Exit. This will close the
Configurator software program.
PC Interface | A-9
Advertisement
Table of Contents
