Table of Contents
Advertisement
Figure A-5.
Schedule tab.
Schedule Tab
Use the Schedule tab to schedule routine Zero.
Verify Now Button
Click to begin verify cycle now.
Abort Button
Click to terminate verification or zero.
Zero Now Button
Click to begin zero cycle now.
Adjust Offset/Span check box
Checked
Not checked
The 5830 will aways adjust the offset after a zero cycle.
NOTE
Set Clock
(Time Synchronization) Click Set Clock to synchronize the clock within the
analyzer with the PC. The Time Synchronization box opens with the PC
time and date and the analyzer time and date. Click Synchronize to set the
time, or click Cancel to close the box.
Check this box to adjust the span after a verify.
Uncheck this box to verify without adjusting the
span.
PC Interface | A-7
Advertisement
Table of Contents
