Panasonic LP-GS Series Serial Communication Command Manual page 98

4. When the code type is QR code, Micro QR code, or iQR code
Name Omit
Object No.
X-position
Y-position
Rotation angle
Code type
Module height
Module width
Version
Mode
Error correction
level (CC-C only)
Human readable
text
Code marking
direction
Module marking
order
Total data length
* Setting request data are variable length.
98
Data
length
[byte]
– Max. 4* "0000"–"1999"
Y Max. 8*
"-999.999"–"+999.999" [mm]
Y Max. 8*
Y Max. 8* "-180.000"–"+180.000" [°]
"10": QR code, model 1, ISO/IEC 18004
"11": QR code, model 2, ISO/IEC 18004
"12": micro QR code
(Y) 2
"13": iQR code (Square)
"14": iQR code (Rectangle)
"15": QR code, GB/T 18284
Y Max. 5*
"0.001"–"9.999" [mm]
Y Max. 5*
Code type
QR code, model 1
QR code, model 2 /
QR code, GB/T 18284
Y Max. 2*
Micro QR code
iQR code (Square)
iQR code (Rectangle)
"0": Number
"1": Alphanumeric (texts for the iQR
code)
Y 1
"2": 8-bit byte (binary)
"3": Kanji
"4": Auto
"0": L
"1": M
Y 1 "2": Q
"3": H (QR code and iQR code only)
"4": S (iQR code only)
"0": OFF
Y 1
"1": ON
"0": One-way direction
Y 1
"1": Alternate
"0": No skip
Y 1 "1": Skip one
"2": Skip two
Max. 59 It is the length including the separator ",".
Data contents
Setting range
"00"–"14"
"00"–"22"
"00"–"04"
"00"–"31"
"01"–"15"
ME-LPGS-SR-5
Remarks
It is the center coordinate of the
code.
The rotation center is the center of
the code symbol.
• For QR code, select model and
standard type.
• When the code data contains
the simplified Chinese
characters, select "15".
• The number of input characters
allowed will vary depending on
the version.
• With "00" specified, the version
will be determined automatically
by the number of characters
contained in the QR code and
its content.
• "4" is not available for iQR code.
• If the different kind of characters
are in the code data, select
"4" to encode the data with the
mixed data mode.
When "Alternate" is selected, the
marking order inverts by module
row or column.
• The filling order for the module
is indicated. Select if you will
mark the modules next to each
other consecutively or skip the
one next to it.
• When on-the-fly marking is set,
set always "0": No skip.