Trigger Delay: Dly - Panasonic LP-GS Series Serial Communication Command Manual

3-3-7 Trigger delay: DLY

Sets the delay time from trigger input to starting trigger processing (lasing) operation. Trigger delay setting is applied to only
the selected file.
⿎ Setting request data / response data for readout
Start
DLY
code command
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
DLY
code
⿎ Data description
Name Data length [byte]
Delay time Max. 4 *
Total data length
* Setting request data are variable length.
Reference
• Trigger delay setting is applied to only the selected file. When you use several files, set the trigger delay for each file.
• When in the selected file the link control with an image checker is set, the link control starts after the trigger delay time.
There is no delay time before TIMING IN.
• The delay time setting is not applied to the on-the-fly marking.
⿎ Example of command settings
Condition: Delay time = 75
• Setting
Transmission data
• Readout
Transmission data
Response data
Sub [Delay time]
Max. 4-byte
R (Check sum)
Data contents
"0000"–"9999" [ms]
Max. 4
[STX] DLY
[STX] DLY
[STX] DLY
(Check
End code
sum)
End code
S 75 [CR]
R [CR]
A 0075 [CR]
ME-LPGS-SR-5
Remarks
65