Panasonic LP-GS Series Serial Communication Command Manual page 117

Name Omit
X-position Y
Y-position Y
X-position Y
Y-position Y
Total data length
⿎ Data example
Condition: Object No. = 1, Point No. = 5, Setting/Deleting = 1, Time unit = 0,
Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = -7
• Setting
Transmission data
Condition: When setting 4 points:
Object No. = 1, Point No. = 0, Setting/Deleting = 1, Time unit = 0,
Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = 7, X-position = 25.5, Y-position = -7,
X-position = -25.5, Y-position = -7, X-position = -25.5, Y-position = 7
• Setting
Transmission data
Data
length Data content
[byte]
Max. 8*
Max. 8*
"-999.999"–"+999.999" [mm]
(Max. 8*)
(Max. 8*)
It is the length including the separator ",".
Variable length within Max. 23 + 18n-byte
Max.
n=Count of the points to set position (n ≦ 50)
23 + 18n
• When setting only one point: Max. 41-byte
• When setting 50 points: Max. 923-byte
[STX] PRD
[STX] PRD
ME-LPGS-SR-5
• Specifies the position of the selected
point no.
• When setting the position of only one
point, do not send further data.
• Specify both X- and Y-position. It is not
accepted to specify only one side.
• When setting two or more points,
specify the position of the following
point no.
• Max. 50 points of positions can be set.
S 1,5,1,0,2000,100,25.5,-7
S 1,0,1,0,2000,100,25.5,7,25.5,-7,-25.5,-7,-25.5,7
Remarks
[CR]
[CR]
117