Lot Period/Character: Lts - Panasonic LP-GS Series Serial Communication Command Manual

3-6-6 Lot period/character: LTS

Sets the characters used with the "Lot" function to change characters depending on the date/time and counter values.
⿎ Setting request data / response data for readout
Start
LTS Sub command
code
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
LTS
code
⿎ Data description
Data length
Name Omit
Lot No. – Max. 2*
Period No. – Max. 2*
90
[Lot No.], [Period No.], [Start period],
[End period], [Lot character]
[Lot No.], [Period No.]
R
Max. 5-byte
[byte]
"00"–"31"
Lot unit
Year, Year (week-based)
Month
Date
Year and month
Month and date
Day of week
Hour
Week
Minute
Hour and minute
Counter
Max. 44-byte
(Check sum)
Data contents
Setting range
"01"–"60"
"01"–"12"
"01"–"31"
"01"–"60"
"01"–"60"
"01"–"07"
"01"–"24"
"01"–"54"
"01"–"60"
"01"–"60"
"01"–"60"
ME-LPGS-SR-5
(Check sum) End code
End code
Remarks
"16" to "31" are the global lot
numbers.
• It is the number that
separates periods to switch
lot characters.
• The setting range varies by
the lot unit.