Panasonic LP-GS Series Serial Communication Command Manual page 141

⿎ Setting request data: Setting deletion
Start
SRA
code
⿎ Data description
Name Omit
Adjustment No.
(From which the
deletion starts)
Adjustment object
(Delete command)
Number of
adjustment settings
to delete
Total data length
* Setting request data are variable length.
Reference
• If the sum of the adjustment number from which the deletion starts and the number of adjustment settings to delete
exceeds 1000, the laser marker returns the negative response.
• In the readout response data when no settings are in the selected adjustment number, the adjustment object is readout
as "0" and the subsequent data do not exist.
⿎ Example of command settings
Condition: Adjustment No. = 0, Adjustment object = 0 (delete the settings of adjustment number 000)
• Setting
Transmission data
Condition: Adjustment No. = 2, Adjustment object = 0, Number of adjustment settings to delete = 10
(delete the settings of the adjustment number 002 to 011)
• Setting
Transmission data
Condition: Adjustment No. = 0 (if there is no setting for the adjustment number read out)
• Readout
Transmission data
Response data
[Adjustment No.], [Adjustment object],
S [Number of adjustment settings to delete]
Data length
Data contents
[byte]
– Max. 3* "000"–"999"
– 1 "0": Delete settings
Y Max. 4* "0001"–"1000"
Max. 10 It is the length including the separator ",".
[STX] SRA
[STX] SRA
[STX] SRA
[STX] SRA
Max. 10-byte
Specifies the number to delete or the number
from which the deletion starts.
• Specifies the number of conditions to delete
before deleting consecutive adjustment
settings after the specified adjustment
number.
• If you omit this item, only the settings of the
specified adjustment number will be deleted.
(The setting to delete one row.)
S 0,0 [CR]
S 2,0,10 [CR]
R 0 [CR]
A 000,0 [CR]
ME-LPGS-SR-5
(Check sum) End code
Remarks
141