Panasonic LP-GS Series Serial Communication Command Manual page 5

• Remove the dust and/or gas which may be generated during the laser radiation with dust collector or
exhauster. Use an appropriate dust collector or exhauster for dust or gas generated.
Depending on the material of the objects, harmful dust and/or gas to the human body and the laser marker
may be generated.
Protective
enclosure
• When using the assist gas for laser processing, take safety precautions to protect operators from
exposure, ignition, toxic effect, excess or lack of oxygen.
• To carry this product, wear the non-slip gloves and safety shoes. Hold the product with both hands. Do not
hold the cables or connectors at carrying.
• For LP-RC/LP-RF series, carry the controller unit with two persons. Lifting or carrying without assistance
may cause of injury.
• Install this product in the stable place without vibration and shock.
• In case it falls down, it may cause injury.
• Do not touch the head surface of LP-RF series during and right after the operation. It becomes hot and
may cause burn injury.
WARNING
CAUTION
ME-LPGS-SR-5
Dust collector
5