Commands Acceptable Only With The Shutter Closed; Commands Acceptable During Alarm/Warning Occurrence - Panasonic LP-GS Series Serial Communication Command Manual

2-4-3 Commands acceptable only with the shutter closed

The following commands can be transmitted only while the shutter is closed.
(Commands are not acceptable when "reception mode ON" is set by MKM command.)
• Guide Laser: start request (GID)
• Laser radiation for measurement: start request (SPT)
• Laser pumping ON (LSR) (LP-RC series only)
Reference
• For LP-RC series, the shutter open request can be accepted after turning on the laser pumping.

2-4-4 Commands acceptable during alarm/warning occurrence

The laser marker accepts only the following commands while an alarm or warning occurs.
⿎ Alarm
• Status checking (STS)
• Alarm reset (ARS)
• Error number (ENO)
⿎ Warning
• Status checking (STS)
• Alarm reset (ARS)
• Error number (ENO)
• Shutter open/close (SHT): Shutter close request and shutter status readout only
• Command reception permission (MKM): Reception permission state readout only
Reference
• For release method of alarm and warning, refer to "Error Indication" (P.169).
ME-LPGS-SR-5
45