Overwrite File: For; Save File To Different No.: Frg - Panasonic LP-GS Series Serial Communication Command Manual

3-4-3 Overwrite file: FOR

Overwrites the file being edited onto the laser marker.
⿎ Setting request data
Start
FOR
code
⿎ Example of command settings
• Setting
Transmission data
Reference
• By this command, in addition to the editing file contents, the settings of the global functional characters such as global
counter, date and lot, and reference list characters for all files are saved to the laser marker.
• When the setting is changed by the following commands, the modified data is saved in the laser marker without
overwriting operation.
• Guide laser scan speed and guide laser Z-movement (GID)
• Current counter value of counter settings (CNT)
• Counter reset (CTR)
• Motion settings for all files (FLY)
• System clock (YMD)

3-4-4 Save file to different No.: FRG

Saves the file being edited to the specified file number in the laser marker.
⿎ Setting request data
Start
FRG
code
⿎ Data description
Data length
Name
[byte]
File number Max. 4*
Total data length Max. 4
* Setting request data are variable length.
⿎ Example of command settings
Condition: File number = 1234
• Setting
Transmission data
S (Check sum)
[STX] FOR
[File number]
S
Max. 4-byte
Data contents
"0000"–"9999"
[STX] FRG
End code
S [CR]
(Check sum)
When you save files by this command, the file
number selected currently also changes to the
specified one.
S 1234 [CR]
ME-LPGS-SR-5
End code
Remarks
73