Marking Position And Laser Power Adjustment Per Trigger: Seo - Panasonic LP-GS Series Serial Communication Command Manual

3-11-5 Marking position and laser power adjustment per trigger: SEO

When the external offset function with "Using SEO command" is set, this command specifies the offset value of marking
position and laser power for all marking data in the file. Send this command per marking trigger.
⿎ Setting request data / response data for readout
Start
SEO
code
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
SEO
code
⿎ Data description
Name Omit
X-movement Y
Y-movement Y
Z-movement Y
Rotation
Y
movement
Laser power
Y
correction
Total data length
* Setting request data are variable length.
Reference
• To use this SEO command, set the external offset function with "Using SEO command" to the file in Laser Marker NAVI
smart beforehand.
• When the file with external offset function with "Using SEO command" is selected, transmit this command by every
marking triggers. Otherwise marking trigger ready does not turn ON, and marking is not available.
• "Using SEO command" setting in external offset function cannot be set together with the following functions in one file.
• Registered characters (via I/O)
• On-the-fly marking at regular intervals
• On-the-fly marking with multiple triggers
128
[X-movement], [Y-movement], [Z-movement],
Sub
[Rotation movement], [Laser power correction]
command
R (Check sum)
Data
length
[byte]
Max. 8*
"-999.999"–"+999.999" [mm]
Max. 8*
Model
LP-GS051
LP-GS052
Max. 8*
LP-GS051-L
LP-RC350S
LP-RF200P
Max. 8* "-180.000"–"+180.000" [°]
Max. 3* "000"–"999" [%]
Max. 39 It is the length including the separator ",".
Max. 39-byte
End code
Data contents
Setting range [mm]
"-003.000"–"+003.000"
"-001.500"–"+001.500"
"+000.000" or omit
ME-LPGS-SR-5
(Check
End code
sum)
Remarks
• Moves the coordinate of the all
marking data in the file.
• The movement value of the
omitted item will be set to 0.
• Z-movement cannot be
specified with LP-GS051-L,
LP-RC and LP-RF series.
• The rotation center is the
center of the marking field.
• Corrects the laser power of the
all marking data in the file.
• The correction ratio is
calculated using the value set
at the laser settings as 100%.
• When this item is omitted, it
will be set to 100.