Object Group Settings: Grp - Panasonic LP-GS Series Serial Communication Command Manual

3-11-3 Object group settings: GRP

Sets the marking position and over-marking by object group. It is also used to specify the filling line spacing for bold
characters and bar codes.
⿎ Setting request data / response data for readout
Start Sub
GRP
code command
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
GRP
code
⿎ Data description
Name
Object group No.
X-movement
Y-movement
Z-movement
Rotation movement
Number of overwritings
Overwriting interval
Bold filling line spacing
Bar code filling line
spacing
Line width
Total data length
* Setting request data are variable length.
[Object group No.], [X-movement], [Y-movement],
[Z-movement], [Rotation movement], [Number of overwritings],
[Overwriting interval], [Bold filling line spacing],
[Bar code filling line spacing], [Line width]
[Object group No.]
R
Max. 4-byte
Data length
Omit
[byte]
– Max. 4* "0000"–"1999"
Y Max. 8*
"-999.999"–"+999.999" [mm]
Y Max. 8*
Model
LP-GS051
LP-GS052
Y Max. 8*
LP-GS051-L
LP-RC350S
LP-RF200P
Y Max. 8* "-180.000"–"+180.000" [°]
Y Max. 4* "0001"–"9999" [times]
Y Max. 4* "00.0"–"60.0" [s]
Y Max. 5* "0.010"–"2.000" [mm]
Y Max. 5* "0.010"–"2.000" [mm]
Y Max. 5* "0.010"–"2.000" [mm]
Max. 68 It is the length including the separator ",".
Max. 68-byte
(Check sum)
Data contents
Setting range [mm]
"-003.000"–"+003.000"
"-001.500"–"+001.500"
"+000.000" or omit
ME-LPGS-SR-5
(Check End
sum) code
End code
Remarks
• Moves the coordinate of
the all marking data in the
specified object group.
• Z-movement cannot
be specified with LP-
GS051-L, LP-RC and LP-
RF series.
• The rotation center is the
center of the marking field.
When on-the-fly marking is
set, set always 0 second to
overwriting interval.
Specifies the spacing of the
marking lines for bar codes
and PDF417 modules.
It is the segment width for the
purpose of calculation.
Applies to the value of
the width for creating the
clearance at the intersection
of lines comprising
characters.
125