File Setting Commands; File Selection By Number: Fno - Panasonic LP-GS Series Serial Communication Command Manual

3-4 File Setting Commands

3-4-1 File selection by number: FNO

Specifies the file number to change the file.
⿎ Setting request data / response data for readout
Start
FNO Sub command
code
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
FNO
code
⿎ Data description
Name Data length [byte]
File number Max. 4*
Total data
Max. 4
length
* Setting request data are variable length.
Reference
• The file change operation turns off the marking trigger ready momentarily.
• If you want to select a file which has no marking data, close the shutter before sending this command.
⿎ Example of command settings
Condition: File number = 10
• Setting
Transmission data
• Readout
Transmission data
Response data
[File number]
Max. 4-byte
R (Check sum)
Data contents
"0000"–"9999"
[STX] FNO
[STX] FNO
[STX] FNO
(Check sum)
End code
Response data for readout returns the file
number currently selected.
S 10 [CR]
R [CR]
A 0010 [CR]
ME-LPGS-SR-5
End code
Remarks
71